Supermicro SYS-6029U-TR4, 2 x Intel Xeon 5217 CPU, 4 x 32GB DDR4 LP ECC RDIMM, 2 x 480GB SATA, 2x 7.68TB NVMe PCIe 3.1

Product SKUs

SYS-6029U-TR4  SuperServer 6029U-TR4 (Black)


 
Motherboard


Super X11DPU

 
Processor/Cache  

CPU Dual Socket P (LGA 3647)
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W

Cores Up to 28 Cores

Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)

 
System Memory  

Memory Capacity 24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM††

Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
2666 ECC DDR4 NVDIMM

Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.  

 
On-Board Devices

Chipset Intel® C621 chipset

SATA SATA3 (6Gbps) with RAID 0, 1, 5, 10

Network Connectivity 4 GbE ports via AOC-2UR68-I4G-P (Intel i350AM4)

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Graphics ASPEED AST2500 BMC


 
Input / Output

SATA 12 SATA3 (6Gbps) ports

SAS 8 SAS3 + 4 SAS3/NVMe support optional

LAN 4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port

USB 3 USB 3.0 ports (2 rear, 1 Type A)

Video 2 VGA ports (1 rear, 1 onboard)

Serial Port / Header 1 Serial header

DOM 2 SuperDOM (Disk on Module) ports


 
System BIOS

BIOS Type AMI 32Mb SPI Flash ROM


 
Management

Software Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
NMI
SSM, SPM, SUM
SuperDoctor® 5

Power Configurations ACPI Power Management


 
PC Health Monitoring

CPU Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator

FAN Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors

Temperature Monitoring for CPU and chassis environment
Thermal Control for fan connectors







Chassis

Form Factor 2U Rackmount

Model CSE-829U2TS-R1K02P-T


 
Dimensions and Weight

Width 17.2" (437mm)

Height 3.5" (89mm)

Depth 28.46" (723mm)

Weight Net Weight: 36 lbs (16.4 kg)
Gross Weight: 72 lbs (32.7 kg)

Available Colors Black


 
Front Panel

Buttons Power On/Off button
System Reset button

LEDs Power status LED
HDD activity LED
Network activity LEDs
System information (overheat/UID) LED


 
Expansion Slots

PCI-Express 1 PCI-E 3.0 x16 (FH, 10.5" L)
5 PCI-E 3.0 x8 (FH, 10.5" L)
1 PCI-E 3.0 x8 (LP)
1 PCI-E 3.0 x8 (internal LP)


(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)  

 
Drive Bays / Storage

Hot-swap 12 Hot-swap 3.5" drive bays
12 SATA3 ports by default;
Optional 8 SAS3 + 4 NVMe/SAS3

M.2 1 M.2 PCI-E 3.0 x4 M-Key NVMe or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional riser card (see optional parts list)
2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2


 
Backplane

2U SAS/SATA backplane

 
System Cooling

Fans 4 Heavy duty 8cm PWM fans


 
Power Supply
1000W Redundant Power Supplies with PMBus
Total Output Power 800W: 100 – 127Vac
1000W: 200 – 240Vac
1000W: 200 – 240Vdc (for CCC only)

Dimension
(W x H x L) 73.5 x 40 x 203 mm

Input 100-127Vac / 9.8 - 7A / 50-60Hz
200-240Vac / 7 - 5A / 50-60Hz
200-240Vdc / 7 - 5A (for CCC only)

+12V Max: 66.7A / Min: 0A (100-127Vac)
Max: 83A / Min: 0A (200-240Vac)
Max: 83A / Min: 0A (200-240Vdc)

12Vsb Max: 2.1A / Min: 0A

Output Type 25 Pairs Gold Finger Connector

Certification Titanium Level96%  Titanium Level
 [ Test Report ]  

 
Operating Environment

RoHS RoHS Compliant

Environmental Spec. Operating Temperature:
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
   -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)