SUPERMICRO MB 1xLGA1151 (Xeon E3-21xx,i3), C246,4xDDR4,5xSATA3,M.2,3xPCIe3.0 (x16/2 x4),2xDP,DVI,VGA,Audio,2x LAN,IPMI

Product SKUs

MBD-X11SCZ-F  X11SCZ-F


 
Physical Stats

Form Factor uATX

Dimensions 9.6" x 9.6" (24.38cm x 24.38cm)


 
Processor/Cache

CPU 8th/9th Generation Intel® Core? i9/Core? i7/Core?i5/Core?i3/Pentium®/Celeron® Processor, Intel® Xeon® E-2100 Processor, Intel® Xeon® E-2200 Processor.
Single Socket LGA-1151 (Socket H4) supported, CPU TDP support Up to 95W TDP
A graphic integrated CPU is required to have onboard video from the DVI and DP ports

 
 
System Memory

Memory Capacity Up to 128GB Unbuffered ECC/non-ECC UDIMM, DDR4-2666MHz, in 4 DIMM slots

Memory Type 2666/2400/2133/1866/1600MHz ECC/Non-ECC DDR4 SDRAM 72-bit 288-pin UDIMM

DIMM Sizes 4GB, 8GB, 16GB, 32GB

Memory Voltage 1.2V

Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)


 
On-Board Devices

Chipset Intel® C246

SATA Intel® C246 controller for 5 SATA3 (6 Gbps) ports; RAID 0,1,5,10

IPMI ASPEED AST2500

Network Controllers Single LAN with Intel® Ethernet Controller I210-AT
Single LAN with Intel® PHY I219LM LAN controller

Audio ALC 888S HD Audio

Graphics Aspeed AST2500 BMC, Intel® HD Graphics
3 Independent Displays


 
Input / Output

 LAN 2 RJ45 Gigabit Ethernet LAN ports

USB 7 USB 2.0 ports (6 via headers, 1 Type A)
2 USB 3.1 Gen1 ports(2 via headers)
6 USB 3.1 Gen2 ports (3 Rears Type A + 1 Rear Type C, 2 via headers)

Video Output 1 VGA D-Sub Connector port, 1 DVI - I port, 2 DP (DisplayPort) ports,
3 Independent Displays

Serial Port / Header 4 COM Ports (4 headers)


TPM TPM Header & Chip both

 




 
Expansion Slots

PCI-E 1 PCI-E 3.0 x16,
2 PCI-E 3.0 x4 (in x8 slot)

M.2 1 M.2 M-Key SATA/PCI-E 3.0 x4, 2280/22110


 
System BIOS

BIOS Type AMI UEFI

BIOS Features ACPI 6.1
SMBIOS 3.1
PCI FW 3.0
UEFI 2.6
RTC (Real Time Clock) Wakeup


 
Management

Software IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, SuperDoctor® 5, Watchdog

System Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support

Power Configurations +12V DC Power Input
ATX Power connector
ACPI Power Management


 
PC Health Monitoring

Voltage +12V, +3.3V, +5V, +5V standby, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, 6 -fan status, Chassis intrusion header, Memory Voltages, Monitors CPU voltages, System temperature, VBAT

FAN 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Dual Cooling Zone, Fan speed control

Temperature Thermal Control for 6 Fan Connectors

LED UID/Remote UID

Other Features 12V DC or ATX Power Source, 8-pin 12v DC power connector, ACPI power management, ATX Power connector, Chassis intrusion header, Dual Cooling Zones, M.2 NGFF connector, RoHS, UID


 
Operating Environment

Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)

Non-Operating Temperature Range -40°C - 85°C (-40°F - 185°F)

Operating Relative Humidity Range 10% ~ 85% (non-condensing)

Non-Operating Relative Humidity Range 5% - 95% (non-condensing)