SUPERMICRO 2U TWIN2 server 4x(2x LGA3647),iC621, 24x DDR4 ECC R, 6x SATA 2,5", SIOM),2x 2200W, IPMI

Product SKUs

SYS-2029BT-HTR  SuperServer 2029BT-HTR (Black)


 
Motherboard


Super X11DPT-B

 
Processor/Cache (per Node)

CPU Dual Socket P (LGA 3647)
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors‡,
Dual UPI up to 10.4GT/s
Support CPU TDP 70-205W*

Cores Up to 28 Cores

Note * 200W/205W CPUs are supported under certain configurations. Please contact Supermicro Technical Support for additional information about specialized system optimization

Note ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).

Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

 
System Memory (per Node)

Memory Capacity 24 DIMM slots
Up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM
Supports Intel® Optane™ DCPMM††

Memory Type 2933†/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM

Note † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
†† Cascade Lake only. Contact your Supermicro sales rep for more info.  

 
On-Board Devices

Chipset Intel® C621 chipset

Storage SATA3 (6Gbps) via Intel C620 controller; RAID 0, 1, 5, 10 per node

Network Must bundle with at least one SIOM network card

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Video ASPEED AST2500 BMC


 
Input / Output (per Node)

LAN 1 RJ45 Dedicated IPMI LAN port

USB 2 USB 3.0 ports (rear)

Video 1 VGA port

DOM 1 SuperDOM (Disk on Module) port

Others SATA DOM for boot drive only


 
System BIOS

BIOS Type AMI 32Mb SPI Flash ROM


 
Management

Software Intel® Node Manager
IPMI 2.0
KVM with dedicated LAN
SSM, SPM, SUM
SuperDoctor® 5
Watch Dog

Power Configurations ACPI / APM Power Management


 
PC Health Monitoring

CPU Monitors for CPU Cores, Chipset Voltages, Memory.
4+1 Phase-switching voltage regulator

FAN Fans with tachometer monitoring
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors

Temperature Monitoring for CPU and chassis environment
Thermal Control for fan connectors







Chassis

Form Factor 2U Rackmount

Model CSE-217BHQ+-R2K22BP2


 
Dimensions and Weight

Width 17.6" (447mm)

Height 3.47" (88mm)

Depth 28.75" (730mm)

Package 24.65" (H) x 9.76" (W) x 45.28" (D)

Weight Gross Weight: 85 lbs (38.6kg)
Net Weight: 54.5 lbs (24.7 kg)

Available Colors Black


 
Front Panel

Buttons Power On/Off button
UID button

LEDs Power status LED
HDD activity LED
Network activity LEDs
Universal Information (UID) LED


 
Expansion Slots (per Node)

PCI-Express 2 PCI-E 3.0 (x16) Low-profile slots
1 SIOM card support
(must bundle with network card)


 
Drive Bays (per Node)

Hot-swap 6 Hot-swap 2.5" SATA3 drive bays


 
System Cooling

Fans 4 Heavy duty 8cm PWM fans with air shroud


 
Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power 1200W/1800W/1980W/2090/2200W

Dimension
(W x H x L) 45 x 40 x 480 mm

Input 1200W: 100-127Vac / 50-60Hz
1800W: 200-220Vac / 50-60Hz
1980W: 220-230Vac / 50-60Hz
2090W: 230-240Vac / 50-60Hz
2090W: 180-220Vac (for UL/cUL only)
2200W: 220-240Vac (for UL/cUL only)
2090W: 230-240Vdc (for CCC only)

+12V Max: 100A / Min: 0A (100-127Vac)
Max: 150A / Min: 0A (200-220Vac)
Max: 165A / Min: 0A (220-230Vac)
Max: 174.17A / Min: 0A (230-240Vac)
Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only)
Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only)
Max: 174.17A / Min: 0A (230-240Vdc, CCC only)

12Vsb Max: 2.1A / Min: 0A

Output Type Gold Finger

Certification Titanium Level96%  Titanium Level
 [ Test Report ]  

 
Operating Environment

RoHS RoHS Compliant

Environmental Spec. Operating Temperature:
   10°C ~ 35°C (50°F ~ 95°F)
Non-operating Temperature:
   -40°C to 60°C (-40°F to 140°F)
Operating Relative Humidity:
   8% to 90% (non-condensing)
Non-operating Relative Humidity:
   5% to 95% (non-condensing)