0
Košík je prázdný
0

    SUPERMICRO MB 2xLGA2011-3, iC612 16x DDR4 ECC,10xSATA3,(PCI-E 3.0/2,2(x16,x8),2x LAN,IPMI

    SUPERMICRO MB 2xLGA2011-3, iC612 16x DDR4 ECC,10xSATA3,(PCI-E 3.0/2,2(x16,x8),2x LAN,IPMI
     

    -0%

    Výrobce
    Supermicro
    Kód

    AS-SR0009

    Part No.

    MBD-X10DRT-P-O

    Vaše cena bez DPH
    14 760 Kč
    Recyklační poplatek
    12.00 Kč , DPH:  21%  (Stolní osobní počítač)
    Autorský fond
    50.00 Kč, DPH:  21%  (HDD+CD/DVD-RW zabudované do PC)
    Vaše cena  s RP* + AF*
    14 822 Kč
    DPH
    21%
    Běžná prodejní cena s DPH
    17 959 Kč
    Sleva je počítána vůči nejnižší běžné prodejní ceně, za kterou byl produkt prodáván za posledních 30 dnů před zahájením slevové akce.
    Vaše cena s DPH
    17 935 Kč
    Záruka
    36 Měsíce
    Objednat

      Podrobnosti o produktu


      Product SKUs

      MBD-X10DRT-P  X10DRT-P


       
      Physical Stats

      Form Factor Proprietary Twin

      Dimensions 6.8" x 18.86" (17.27cm x 47.9cm)


       
      Processor/Cache

      CPU Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
      Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W

      Cores / Cache Up to 22 cores † / Up to 55MB† cache

      Note † BIOS version 2.0 or above is required

      Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.

       
       
      System Memory

      Memory Capacity 2TB 3DS ECC RDIMM, DDR4-2133MHz; Up to 2TB 3DS ECC LRDIMM, in 16 DIMM slots

      Memory Type 2400?/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

      DIMM Sizes RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB
      LRDIMM: 32GB, 64GB
      3DS LRDIMM: 128GB

      Memory Voltage 1.2V

      Error Detection Corrects single-bit errors


       
      On-Board Devices

      Chipset Intel® C612

      SATA Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10

      AHCI SATA SATA3 (6Gbps); RAID 0, 1, 5, 10

      SCU SATA SATA3 (6Gbps); RAID 0, 1, 5, 10

      IPMI Support for Intelligent Platform Management Interface v.2.0
      IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
      ASPEED AST2400 BMC

      Network Controllers Dual LAN with Intel® Ethernet Controller I350-AM2
      Single LAN with Virtual Machine Device Queues reduce I/O overhead
      Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output
      Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)

      Graphics Aspeed AST2400 BMC


       
      Input / Output

      SATA 10 SATA3 (6Gbps) port

      LAN 2 RJ45 Gigabit Ethernet LAN ports
      1 RJ45 Dedicated IPMI LAN port

      USB 3 USB 3.0 ports (2 rear + 1 Type A)

      Video Output 1 VGA port

      TPM 1 TPM Header

       




       
      Expansion Slots

      PCI-E 1 PCI-E 3.0 x16,
      1 PCI-E 3.0 x8,
      1 PCI-E 3.0 x8 connector for SMC add-on cards,
      1 PCI-E 3.0 x16 connector for SMC add-on cards,
      (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)



       
      System BIOS

      BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS

      BIOS Features Plug and Play (PnP)
      PCI 2.3
      ACPI 1.0 / 2.0 / 3.0 / 4.0
      USB Keyboard support
      SMBIOS 2.7.1
      UEFI 2.3.1


       
      Management

      Software IPMI2.0, NMI, SuperDoctor® 5, Watchdog

      System Management Software SPM
      SUM
      SSM
      SuperDoctor 5

      Power Configurations ACPI Power Management
      Power-on mode for AC power recovery


       
      PC Health Monitoring

      Voltage +12V, +3.3V, +5V, 3.3V standby, 6 Phase-switching voltage regulator, Memory Voltages, VBAT

      FAN 2x 4-pin fan headers (up to 2 fans), 4 fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control

      Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 4 Fan Connectors (2 fans on backplane), Thermal Monitor 2 (TM2) support, PECI

      LED CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID

      Other Features RoHS


       
      Operating Environment

      Operating Temperature Range 10°C - 35°C (50°F - 95°F)

      Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)

      Operating Relative Humidity Range 8% - 90% (non-condensing)

      Non-Operating Relative Humidity Range 5% - 95% (non-condensing)



      Produkt manažer:

      Petr Balvin,  +420 222 745 164,  petr.balvin@netfox.cz

      Poslat info

      Dotaz k tomuto produktu

      Váš e-mail
      Dotaz
      Stránka je chráněna pomocí Google reCAPTCHA

      Nalezli jste jinde na internetu nižší cenu?

      Váš e-mail
      Cena bez DPH
      Cena s DPH
      WWW
      Komentář
      Mám o tento produkt zájem
      Stránka je chráněna pomocí Google reCAPTCHA

      Zaslat informaci o produktu známému

      Váš e-mail
      Zaslat na e-mail
      Komentář
      Stránka je chráněna pomocí Google reCAPTCHA

      Nalezli jste chybu?

      Popis závady
      Váš e-mail
      Stránka je chráněna pomocí Google reCAPTCHA