0
Košík je prázdný
- Kategorie
- Výrobci
Produkt je vyřazen!
Produkt již není v naší nabídce.
Kontaktujte prosím, manažera produktu:
Petr Balvin
SUPERMICRO MB 2x Socket G34, SR5690/SP5100,16xRAM DDR3,6xSATA, 8x SAS 6Gbps,RAID,3/1/2 PCI-E 2.0 x16/x8/x4, IPMI
Výrobce
Supermicro
Kód
AS-S2339
Part No.
MBD-H8DG6-F-O
Zařazení produktu
Poslat info
Dotaz k tomuto produktu
Nalezli jste jinde na internetu nižší cenu?
Zaslat informaci o produktu známému
Nalezli jste chybu?
Související produkty
Špičková japonská teplovodivá stříbrná pasta pro ideální přenos mezi čipem a chladičem. Obsahuje skvělých 0,5g speciální kovově stříbrné pasty s vysokou teplotní vodivostí. Pracuje při teplotách -30 - 240°C. Obsahuje 30% stříbrných a kovových částic. N...
54 Kč
bez DPH
65 Kč
s DPH
Podrobnosti o produktu
Serverový konfigurátor
1. Dual AMD Opteron™ 6000 series (6300 ready) processors (Socket G34) 16/12/8/4-Core ready; HT3.0 Link support 2. Dual AMD SR5690 / SP5100 Chipset 3. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets 4. Intel® 82576 Dual-Port Gigabit Ethernet Controller 5. LSI 2008 SAS 8-Port 6 Gbps SAS Controller; RAID 0, 1, 10; RAID 5 optional 6. 6x SATA2 (3.0 Gb/s) ports via AMD SP5100 Controller; RAID 0, 1, 10 7. 3/1/2 PCI-E 2.0 x16/x8/x4 (in x8) expansion slots 8. Integrated Matrox G200eW Graphics 9. Integrated IPMI 2.0 with dedicated LAN Physical Stats Form Factor E-ATX Form Dimensions 12" x 13 " (30.5cm x 33.2cm) Processor/Chipset CPU Dual 1944-pin Socket G34 Supports up to two 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors HT3.0 Link support Chipset Dual AMD chipset SR5690/SP5100 System Memory Memory Capacity 16 DIMM sockets Supports up to 512GB Registered ECC or 128GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 16 DIMMs Quad channel memory bus For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks See Detailed Memory Support Matrix Memory Type DDR3 1600/1333/1066 MHz Registered ECC or unbuffered ECC / non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 1GB, 2GB, 4GB, 8GB, 16GB, 32GB Memory Voltage 1.35V or 1.5V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory) On-Board Devices SATA AMD SP5100 (RAID 0, 1, 10) SAS LSI 2008 8 port SAS controller RAID 0, 1, 10; RAID 5 Optional Optional: AOC-SAS2-RAID5-KEY RAID 5 support IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support Winbond® WPCM450 BMC Network Controllers Intel® 82576 controller, Dual-Port Gigabit Ethernet 10/100/1000BASE-T support VGA Matrox G200 16MB DDR2 Super I/O Winbond® W83527 chip Input / Output SATA 6x SATA2.0 (3Gb/s) Ports SAS Integrated LSI 2008 SAS2 Controller Each SAS port supports up to 4 SAS / SATA drives LAN 2 RJ45 LAN ports 1 RJ45 Dedicated LAN supports IPMI USB 8x USB 2.0 ports 2x Rear and 2x header (4 ports), 2x TypeA VGA 1x VGA port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x serial port header Others 1 SATA DOM power connector, TPM header Expansion Slots PCI-Express 3/1/2 PCI-E 2.0 x16/x8/x4 (in x8) Chassis ( Optimized for H8DG6-F ) 2U Chassis CSE-825TQ-R720LPB Tower / 4U Rackmount CSE-745TQ-920B CSE-745TQ-R1200B CSE-745TQ-R800B System BIOS BIOS Type 16Mb SPI Flash ROM with AMI® BIOS BIOS Features Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 2.0 USB Keyboard Support SMBIOS 2.3 Management Software IPMI (Intelligent Platform Management Interface) 2.0 Super Doctor III Watch Dog Power Configurations ACPI Power Management Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power loss recovery PC Health Monitoring CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset CPU switching voltage regulator FAN Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control 3-pin fan support (w/o speed control) Low noise fan speed control (4-pin fan only) Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I2C Temperature Sensing Logic LED CPU / System Overheat LED +5V Standby Alert LED Other Features Chassis Intrusion Detection Chassis Intrusion Header Operating Environment / Compliance RoHS RoHS Compliant 6/6, Pb Free Environmental Specifications Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) OS Compatibility • Please see our OS Compatibility Chart Regulatory FCC Passed to meet FCC standard requirementProdukt manažer:
Petr Balvin, +420 222 745 164, petr.balvin@netfox.cz