SUPERMICRO 2U GPU TWIN server 2x(2x LGA2011-3),iC612, 2x(16x DDR4 ECC R), 2x(8x SATA3),2x 1280W,2x(2x10GbE-T)

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
1. Dual socket R3 (LGA 2011) supports
   Intel® Xeon® processor E5-2600 v3
   family; QPI up to 9.6GT/s
2. Up to 1TB ECC LRDIMM, 512GB ECC
   RDIMM, up to 2133MHz; 16x DIMM
   sockets
3. 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slot,
   and 1x PCI-E 3.0 x16 for
   GPU/Xeon Phi support (w/ GPU kit)
4. Intel® X540 Dual port 10GBase-T LAN
5. Integrated IPMI 2.0 with KVM and
   Dedicated LAN 6. 8x 2.5" Hot-swap SATA HDD Bays
7. mSATA (full size) support
8. 1280W Redundant Power Supplies
   Platinum Level Digital (95%)

Processor/Cache (per Node)  

CPU Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP **)
Dual Socket R3 (LGA 2011)

Cores / Cache Up to 18 Cores / Up to 45MB Cache

System Bus QPI up to 9.6 GT/s

Note ** Please contact your Supermicro sales representative for additional details.  
 
System Memory (per Node)

Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM

Memory Type 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit

DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB

Memory Voltage 1.2 V

Error Detection Corrects single-bit errors

 
On-Board Devices

Chipset Intel® C612 Express chipset

SATA SATA3 (6Gbps); RAID 0, 1, 5, 10

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC

Network Controllers Intel® X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics ASPEED AST2400 BMC

 
Input / Output (per Node)

SATA 8x SATA3 (6Gbps) ports

LAN 2x RJ45 10GBase-T ports
1x RJ45 Dedicated IPMI LAN port

USB 2x USB 3.0 ports total (2x rear)

VGA 1x VGA port

Serial Port / Header 1x Fast UART 16550 port / 1 Header

 
Chassis

Form Factor 2U Rackmount

Model CSE-217HD+-R1K28B

 
Dimensions and Weight

Width 17.25" (438mm)

Height 3.47" (88mm)

Depth 28.5" (724mm)

Gross Weight 85 lbs (38.6kg)

Available Colors Black

 
Front Panel

Buttons Power On/Off button
System Reset button
UID button

LEDs Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED

 
Expansion Slots (per Node)

PCI-Express 1x PCI-E 3.0 x16 Low-profile slot
1x PCI-E 3.0 x8 slot
1x PCI-E 3.0 x16 for GPU/Xeon Phi support (w/ GPU kit)

(Both CPUs need to be installed for full access to PCI-E slots)

 
Drive Bays (per Node)

Hot-swap 8x 2.5" Hot-swap SATA HDD trays

 
System Cooling

Fans 4x 8cm heavy duty PWM fans with optimal fan speed control

 
Power Supply

1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz
1280W Output @ 200-240V, 6-8A, 50-60Hz

DC Output 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A

Certification Platinum Level Certified95%+
 Platinum Certified
 [ Test Report ]  
 
System BIOS

BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI

 
Operating Environment / Compliance

RoHS
RoHS Compliant

Environmental Spec. Operating Temperature:
  10°C to 35°C (50°F to 95°F)
Non-operating Temperature:
  -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
  8% to 90% (non-condensing)
Non-operating Relative Humidity:
  5% to 95% (non-condensing)